Application Fee
$120Verified by NH Board of Trades
Sheet Metal Workers Licensing in New Hampshire
Review current requirements, exam details, renewal cycle, and salary outlook for sheet metal workers in New Hampshire, including $120 and board contact links.
Last verified: Feb 21, 2026
Current
Exam Requirement
State exam requiredRenewal Cycle
See board renewal rulesLicensing Blueprint for Sheet Metal Workers in New Hampshire
Estimated timeline: 1-3 monthsCore Requirements
- 1
Provide written evidence of good professional character and good physical and mental health
- 2
Ability to read and write the English language
- 3
Be a graduate of an approved program in practical nursing or demonstrate comparable education
- 4
Applicants for initial permanent licensure or endorsement must submit a notarized criminal history record release form along with a complete set of fingerprints taken by a qualified law enforcement agency or authorized employee of the New Hampshire Department of Safety
- 5
To continue or re-enter practice, validate 400 hours active-in-practice within four years prior to application
- 6
Provide written evidence of good professional character and good physical and mental health - Ability to read and write the English language - Be a graduate of an approved program in practical nursing or demonstrate comparable education - Applican
- 7
Education: Specific course required.
- 8
Experience: No experience required.
- 9
Background/Criminal Review: Background check required.
- 10
Physical Requirement: No physical requirements.
- 11
License Type: Stand-alone license.
- 12
This practice requires basic knowledge and skill acquired in an accredited school or program of practical nursing or comparable educational experience that has been completed in New Hampshire.
- 13
- Be a graduate of an approved program in practical nursing or demonstrate comparable education.
- 14
- Applicants for initial permanent licensure or endorsement must submit a notarized criminal history record release form along with a complete set of fingerprints taken by a qualified law enforcement agency or authorized employee of the New Hampshire Department of Safety.
- 15
- To continue or re-enter practice, validate 400 hours active-in-practice within four years prior to application.
- 16
Examination: Written examination required.
- 17
Continuing Education: 30 hours of workshops, conferences, lectures, or in-service educational offerings per renewal period, designed to enhance nursing knowledge, judgement, and skills.
Exam and processing details
- Written examination required
Continuing education and program notes
- 30 hours of workshops, conferences, lectures, or in-service educational offerings per renewal period, designed to enhance nursing knowledge, judgement, and skills
| Fee Type | Amount |
|---|---|
| NCLEX examination | $200 |
| Initial licensure | $120 |
| Endorsement | $120 |
| Reinstatement | $120 |
| Biennial renewal | $80 |
| Temporary licensure | $20 |
| Verification | $25 |
| FBI Criminal History Record, including fingerprinting (through the NH State Police) | $51.50 |
| I Criminal History Record, including fingerprinting (through the NH State Police) | $51.50 |
Application Snapshot
- Licensing Authority
Office of Professional Licensure and Certification
- Current Filing Fee
$120
- Renewal Cycle
See board renewal rules
- Salary Position
$53,380 median (12% below national)
- State Salary Rank
#38 of 50 states
Step-by-Step Process (8)
- 1. Confirm eligibility prerequisites (Provide written evidence of good professional character and good physical and mental health; Provide written evidence of good professional character and good physical and mental health - Ability to read and write the English langu...).
- 2. Complete required education or training: Specific course required.
- 3. Document required supervised experience: No experience required.
- 4. Pass required examination steps: State exam required Written examination required.
- 5. Prepare supporting documentation (background check: Background check required; To continue or re-enter practice, validate 400 hours active-in-practice within four years prior to application; Background/Criminal Review: Background check required.).
- 6. Budget filing costs (NCLEX examination: $200; Initial licensure: $120).
- 7. Submit the application to Office of Professional Licensure and Certification and monitor board communications.
- 8. Maintain post-licensure compliance (continuing education: Continuing education required to maintain license).
Salary Insights in New Hampshire
With a median salary of $53,380, Sheet Metal Workerss in New Hampshire earn 12% below the national median of $60,850. New Hampshire ranks #38 among 50 states. The typical licensing timeline is 1-3 months.
State Hiring Climate (QCEW)
SteadyQoQ Employment Change
+1.3%Average Weekly Wage
$1,490Median annual salary
$53,380Hourly estimate
$25.6612% below national median
Difference: -$7,470
Percentile Distribution
Annual compensationSheet Metal Workers Salary Ranking
#38 of 50 statesfor Sheet Metal Workers median salary
| Rank | State | Median Salary |
|---|---|---|
| #1 | New Jersey | $94,310 |
| #2 | Illinois | $93,570 |
| #3 | Washington | $93,230 |
| #4 | Hawaii | $91,540 |
| #5 | Alaska | $82,750 |
Nearby States Comparison
Sheet Metal Workers licensing across the region| State | Median Salary | Education | Exam | Timeline |
|---|---|---|---|---|
| New Hampshire | $53,380 | Specific course required | State exam required | 1-3 months |
| Maine | $60,320 | Specific course required | Third-party exam required | Varies by board |
| Vermont | $56,890 | No educational requirements | No exam required | Varies by board |
| Massachusetts | $79,260 | Varies by state board | State-approved exam | Varies by board |
License by Endorsement
Transfer requirements are state-specific. Use this quick matrix as a planning signal, then verify final endorsement rules with each board.
| State | Reciprocity Score | Tier | Notes |
|---|---|---|---|
| New Hampshire | 50 | Low | State-specific exam conditions may apply. Documented experience may be required. |
| Maine | 62 | Medium | State-specific exam conditions may apply. Background check or criminal history review is indicated. |
| Vermont | 54 | Low | State-specific exam conditions may apply. Documented experience may be required. |
| Massachusetts | 72 | Medium | Background check or criminal history review is indicated. |
- License status indicator: Active.
- Continuing education indicator: Continuing education required to maintain license.
- Reciprocity and transfer rules vary by state board. Verify directly with the agency.
Official Licensing Agency
Official website verified
Office of Professional Licensure and Certification
7 Eagle Square, Concord, NH, 03301
Phone: 6032712152
Related Careers in New Hampshire
| Profession | Median Salary | Education | Timeline |
|---|---|---|---|
| Aircraft Mechanics and Service Technicians | $78,960 | Varies by state board | Varies by board |
| Automotive Service Technicians and Mechanics | $58,460 | Varies by state board | Varies by board |
| Carpenter | $59,890 | Specific course required | Varies by board |
| Construction and Building Inspector | $66,750 | No educational requirements | Varies by board |
FAQ
How long does it take to become a Sheet Metal Workers in New Hampshire?
Most applicants finish the licensing path in about 1-3 months, but timing can change based on education track, exam scheduling, and board processing.
What exams are required for Sheet Metal Workerss in New Hampshire?
New Hampshire lists State exam required as part of the licensure process for Sheet Metal Workerss.
What education do you need to become a Sheet Metal Workers in New Hampshire?
The board typically expects Specific course required for Sheet Metal Workers licensure in New Hampshire.
What is the typical Sheet Metal Workers salary in New Hampshire?
The median annual salary for Sheet Metal Workerss in New Hampshire is $53,380. Salaries range from $31,200 (10th percentile) to $69,040 (90th percentile).
How does the Sheet Metal Workers salary in New Hampshire compare to the national average?
Sheet Metal Workerss in New Hampshire earn 12% below the national median of $60,850, with a state median of $53,380.
How many Sheet Metal Workerss work in New Hampshire?
New Hampshire employs approximately 750 Sheet Metal Workerss according to BLS data.
Can I transfer my Sheet Metal Workers license to New Hampshire from another state?
Transfer requirements vary by board. License status indicator: Active. Continuing education indicator: Continuing education required to maintain license. Reciprocity and transfer rules vary by state board. Verify directly with the agency.
Who is the licensing agency for Sheet Metal Workerss in New Hampshire?
The licensing agency is Office of Professional Licensure and Certification. Review agency details at https://www.oplc.nh.gov/new-hampshire-board-nursing.
How often do you renew a Sheet Metal Workers license in New Hampshire?
Current guidance indicates a renewal cycle of See board renewal rules.